Coty_Smothers

NOTE TO VIEWERS: It has been a long time since I updated this thing and alot has changed since then, so just ignore the info unless you have time to waste. END OF NOTE Profile has yet to be updated, until then it will be stored on a word document where it will be edited. Until then, this is all. "Pizza hut song":http://www.youtube.com/watch?v=V1c0Lle01_M ______________________________________________________________________________ Appearance- ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Height: 6 feet 3 inches tall. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Clothing: Currently a fluorescent orange T-Shirt, but the shirt is slightly less flimsy than other normal T-Shirts. Most of the time a dark green sports jacket with rusty barbed wire, rusty razor wire, and thorn vines weaves through loops hanging off the jacket, covering the whole jacket. Gray, slightly worn gloves that a blacksmith would normally wear while working. “Pants”:http://farm5.static.flickr.com/4007/4253499888_d83b2ba576.jpg
“Helmet”:http://www.italianlegendaryprotection.com/magnifier/video.jpg
“Shoes”:http://upload.wikimedia.org/wikipedia/commons/a/a8/New-Rock-boots.jpg (>.> Don’t complain, they’re the only shoes I could find that were bulky enough. And for some reason, the links won't work properly.) And white socks. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Eye colour: Green. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Hair colour & Length: Chesnut and reaching down to my knees. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Skin Colour: Caucasian _____________________________________________________________________________________

Other info- ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Blood Type: B- _____________________________________________________________________________________


Shop: The ground level room is where the shop’s exchanges are made and the one mostly used by customers. The ground level room has a ceiling that is 15 feet tall, with steel rafters. The roof of the shop is sloped at a 20 degree angle. The outside walls of the shop are galvanized iron, while the inner walls of the shop are maple wood. The ground level floor of the shop is 50 feet squared. The floor of the ground level room is made of maple wood. The structure of the ground level floor may change over time so that the shop may have a second floor, if enough money is made to pay for the cost of the construction. There is one of each item in the ground level room of the shop, as a preview of what is available. Most are on shelves, racks, etc. against the walls of the shop to help save room. Any items larger than an average couch are stored in the basement instead of in the ground level room. The basement is 100x100x75 feet. The reason for such a large area is because the basement is where I work on creating new Items to sell at the shop and not only for storage.. The basement is off limits to customers unless they wish to see the items that are stored down there because of their size. While in the shop, depending on the item, you may take it out back to try it out in an area designed for testing of various items. There is a large door in the basement, leading up a slope, to ground level for items to be moved out that are too large to be moved through the front door. The inner wall holding the door is covered in mirrors. ______________________________________________________________________________________________________________________

Items currently being sold: ______________________________________________________________________________________________________________________

Swords, Daggers etc.- ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Sponge sword (Name suggested by Eka Diclonius.): The way that it works is that the inside of the blade and hilt is hollow, liquids with less thickness less than that of syrup can be used, otherwise it will clog. There are tiny holes in the blade going into the hollow part to let the liquid out with grooves going across the blade to disperse the liquid all over the sword and not in just one spot. The pommel has a cap that leads into the hollow part so one can put more liquids in it when needed. If you plan on using oil or other flammable liquids then I have a certain kind of sheath you could use for it. The inner part of the sheath is thinly lined with a flint, to create a spark when drawing and automatically have a flaming sword. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Main Gauche: This item is small enough to be considered a dagger or a knife. One side of the blade has deep, straight edged grooves to allow for entrapment of others’ blades. One could also possibly snap the opponent’s blades with the deep grooves. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬


Hook sword: Sold in pairs, the hooks of the weapons may be used to trap or deflect other weapons. Components of the hook sword: The back, which is used as regular swords; the hook, which is used to trip enemies and to catch weapons, not to mention the rather more obvious use of slashing; the end of the hilt, which is sharpened into daggers; the crescent guard, which is used for blocking and slashing; and the link, which is used when you have a pair. The two hooks can loosely connect together, and the wielder swings one hook sword, so in a way that the second is extended further out, almost 6 feet. While the second is in the air, the dagger upon the hilt slashes any target. In this way, the wielder can extend his/her reach out from three feet to six. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬


Witchblade: A sword made for those who tend to fight against magic users more than other types of opponents. Made of Magisteel, and since I have a very limited supply of the material, this is the only one in stock. Image:http://s1184.photobucket.com/albums/z329/royalfool1/?action=view¤t=WitchBlade.jpg#!oZZ2QQcurrentZZhttp%3A%2F%2Fs1184.photobucket.com%2Falbums%2Fz329%2Froyalfool1%2F%3Faction%3Dview%26current%3DWitchBlade.jpg ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Federschwert: The metal sword consists of a very thin, rounded blade with a large ricasso and a heavy hilt and pommel. Because of this, it has the same weight and Center of Balance as a real sword, and handles identically. This sword is meant for practice.
______________________________________________________________________________________________________________________



Shields- ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Heater shield (Limited supply.):+ Made of 3/4 inch thick Kentchin and is fireproof. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Tower shield: Made of 3 inch thick Titanium. The shield is capable of launching up to ten disk blades out of the bottom of the shield. The ones that are being sold are not as powerful as the original, but just as useful. Even though the shield is 3 inches thick, it is hollow, to take off excess weight. The shield launches disks up to 79.25 feet. The shield uses a cord that is inside of the shield, launching the disks like how a crossbow would launch bolts. The distance it can launch disks gives the shield its name. One can ask for the disks to be made hollow for storing small items inside of them and transport them across a large gap, or up into the window of a tower. I also carry a type of disk that is like a firework or a flare, for signaling others. ______________________________________________________________________________________________________________________

Other blades-

Hunga Munga (Most used name for the Item.): This weapon’s shape was designed so it could be thrown or used in hand to hand combat. Though when it is thrown and the opponent attempts to use a shield to block the weapon, due to the blade’s unique shape, it can hook onto the edges of the shield, and vault itself around the shield so it could still hit the target. Though, if the weapon were to hit dead centre of the shield, it would have no possibility of vaulting around the shield. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Custom blades: Just give me a description or drawing of the blade design you want and the materials you want it to be made of and I’ll make it. If I do not have the materials in stock you will need to supply me with them. ______________________________________________________________________________________________________________________


Vehicles- ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬


Carriage: These are here for whatever you may need them for, whether it be a wedding, for a costume party or other occasions. They can be rented or bought. There are three types of carriages being sold; One for transporting goods, one that had a foldable roof, and one that does not have a foldable roof but does have glass windows. There are six carriages in stock currently, two of each type. For each type one is made mostly of wood and the other is made mostly of iron, except for the seats and optional curtains inside. The carriages have not been painted yet, so that the customer may choose what they wish the colors to be. All of the carriages are downstairs in the basement due to their size, but a life size picture/poster is hanging in the ground level room on a wall. Horses are not included. ______________________________________________________________________________________________________________________


Decoration-

Stainless steel arms and armour: Since they are not meant for battle use, they are made of stainless steel, but could be if the user was desperate enough. The armour decorations include; Kite shields, heater shields, bucklers, round shields, scutums, chainmail, 15th century plate armor, and gladiator armor & shields. The pole arms that are available are; Naginata, Nagamaki, Dagger-axe, Ji, Woldo, Guan dao, Winged spear, Voulge, Svärdstav, Scottish Halberd, Lochaber axe, Jeddart staff, Brogit staff, Maul, Sparth, Guisarme, Glaive, Fauchard, Kontos, Spear, Lance. Also carrying many types of swords, axes, and taking orders for custom shaped arms and armor. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Large stone dice: Large dice made of stone. The types of dice currently being sold are; 4 sided, 6 sided, 8 sided, 10 sided, 12 sided, and 100 sided (Yes, they exist.). The 100 sided dice are three times the size of the others, making it the size of an average person’s torso. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Large stone chess pieces and stone plates. The stone plates are each one of the squares of a chess board. The average height of the pieces is 4 feet. ______________________________________________________________________________________________________________________


Mixed items- ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Baseball bat/sword: It is a baseball bat that can work as a club, or a sword. At the end of the grip, where the metal of the bat first shows after the grip, there is a point where the end of the bat can separate, acting as the sheath for the sword. The only bats with materials premade are fully iron bats with a rubber grip. Any other materials one may want the bat to be made of will be made, but the customer will have to wait until it is finished. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Hammer/Axe/Hook swords: It's five feet long and at the top on one side are an axe and the other side is a square hammer head. The area of the hammer head is 9 square inches. On the bottom there’s four hook sword blades that's hooks point away from the centre, like that of a four hook fish hook. The hook sword blades are capable of launching from the pole like a grappling hook either all together or separately. The hook swords are connected to the pole by thin, but strong chains. The pole, hook sword blades, and hammer head are made of Titanium. The pole's thickness is 3 inches in diameter. The axe's blade is made of folded iron, like how katanas are made to give it greater capability to cut. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬


Umbrella sword: Unlike the Penguin’s from the batman series which usually just had a blade jutting out from the tip of the umbrella, this umbrella sword is a full length sword. The umbrella handle acts as the sword’s handle and the rest of the umbrella is the sheath. Though, it is still a fully functional umbrella. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬



Cane Sword: The classic cane sword. It’s locking mechanism to prevent accidents can be either twist and lock/unlock, or push a button to unlock. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Cane Gun: Replicas of the antique cane guns, but still functional. One type of canes being sold use pin fire rounds, another type used shotgun like shells, and the third type is a flare gun cane. ______________________________________________________________________________________________________________________



Armour- ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Plate: Standard plate armor. The plate armour can be bought as a whole suit, or just parts of the plate armour suit. The separate pieces currently being sold are; Barbute (Helm), Capeline (Helm), Sallet (Helm), Cuirass (Torso), Gauntlet (Hand & Wrist), Pauldron (Shoulder), Vambrace (Forearm), Greave (Shin), and Sabaton (Foot). If one only needs one of these parts instead of the whole armor, that is what the separate parts are for. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Vehicle: Armour for vehicles are the easiest for me to make. There are no premade armour for vehicles, since there is no telling what the customer may want a vehicle to be armoured. The size of the vehicle and how much armour will determine the amount of time it will take to make the vehicle. One can also ask for specific designs to be used in the armor such as spikes or a way the metal is forged to create an effect such as waves, or curved walls. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Fire resistant: This armor is a fully body plate armor made of Kentchin. The Kentchin will not melt from most extreme heat levels. Though this alone would leave the user to be cooked alive inside of his armor, which is why the inside of the armor is lined with a layer of Aerogel to act as an insulator. Aerogel is a great insulator; it looks like glass with a slight blue tint and is very lightweight. It could keep a wax crayon on the top of the Aerogel from melting while a burner is on the underside of the Aerogel for days. ______________________________________________________________________________________________________________________

Traps- ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Foothold traps: The foothold trap is made up of two jaws, one or two springs, and a trigger in the middle which is usually a round pan. When the prey steps on the trigger the trap closes around the foot, preventing the prey from escaping. These traps are made in various sizes from catching weasels to bears. The jaws can either be flat, or with teeth. Unlike some other foothold traps, the ones sold here have a locking mechanism to prevent the jaws from being pried apart until the key it used to unlock the mechanism. Key included. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Mantrap: It is very similar to the Foothold trap, but larger. These are used for trapping intruders, robbers, etc. If it does not trap the intruder, then it would most likely impede their movement. ______________________________________________________________________________________________________________________


Two handed- ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Kanabō: It has been said that one purpose of the kanabō type of weapons was to smash enemies' armor, bones and the legs of their warhorses The art of using this cumbersome weapon, kanabō-jutsu or Tetsubo-jutsu, consisted of a mastery of both balance and strength; it required great skill to recover from a miss with the heavy club, which could leave a wielder open to a counter-attack. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Zhanmadao: A large sword meant for dealing massive damage. ______________________________________________________________________________________________________________________

Ranged- ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Two in one gun: This gun has four barrels, three for shotgun shells, and one for launching a grenade. Since there is only one trigger, it fires all four at once, leaving anyone in it’s way to be destroyed. But since it fires all four at once, it creates immense amounts of strain on the gun, which is why I’ve made it out of a certain metal, Comprium. The Comprium is not as strong as it could possibly be, since it was only made to meet the needs of the barrel strength, and not any further. The shotgun shells are buckshot, the pellets being made of osmium to give them much greater momentum since the metal is very dense. “Image”:http://s1184.photobucket.com/albums/z329/royalfool1/?action=view¤t=WitchBlade.jpg#!oZZ1QQcurrentZZhttp%3A%2F%2Fs1184.photobucket.com%2Falbums%2Fz329%2Froyalfool1%2F%3Faction%3Dview%26current%3DTwoinonegun.jpg
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Hwacha: The hwacha's structure was very similar to a hand cart with a mobile wooden Launchpad on the top filled with 100 to 200 cylindrical holes, into which the igniters were placed. The ammunition, like the singijeon, a variation of Korean fire arrow, consisted of an arrow with an iron head and a fletching section with a paper gunpowder pouch attached to it. The gunpowder pouch acts as a rocket to propel the arrow. The back side of the Hwacha featured two parallel arms that allowed the operator to push and pull the machine, and a vertical strip designed for in-line attacks or stand ground-sentry positions. The wagon-like wheels are usually fastened by wood pivots and iron axles. In order to reduce friction between the wheels and the axles, tar oil is used.