getnameneck

The silvering and gold plating craft is one of the traditional techniques of metal fine decoration in ancient China. The crafts produced are both have the composed characteristic of the bronzes, and the dazzling splendor of gold.
In a broad sense, if we place patterns on the objects and decorate them with gold and silver, we can call silvering and gold plating picture necklace. The decorative theme and content of the ancient silvering and gold plating decorations are mainly inscriptions, geometric patterns, animal prints. a At present, there are only two kinds of decoration methods: gilt carving and colorfully embellished.
Colorfully embellished decoration method
The main processes of the colorfully embellished method are as follows:
(1) Manufacturing “gold amalgam”: In the “gold amalgam” method, the gold fragments are placed in a crucible, heated up to more than four hundred degrees Celsius, and then added seven times as much mercury as gold to dissolve it into a liquid to make a so-called “mud gold.”
(2) Gold coating: Use mud gold photo necklace to paint various intricate patterns on the bronze or in the pre-cast grooves.
(3) Golden roasting: The mercury is vaporized by warming the fire with smokeless charcoal, and the gold pattern is fixed on the surface of the bronze ware.
Gilt carving decoration method
“Gold and silver should be decorated with gilt carving”, which is carved. In the silvering and gold plating custom necklace cheap process, the decoration method of gold and silver is inlaid by engraving shallow grooves, which is also called the gold decoration method.
The production of gilt carving decoration is divided into four steps:
(1) Making the model: Pre-groove the pattern on the surface of the model according to the pattern, image and text, so that the utensil is cast and the gold infinity name necklace and silver are embedded in the groove. The grooves are generally engraved into a delta-shaped groove, and pitting is formed on the bottom surface of the groove so that the embedded gold and silver can be firmly attached.
(2) Grooving: "After the bronze is cast, the groove needs to be chiseled and finely decorated. The groove needs to be painted name necklace cheap with ink on the table, and then the shallow groove is engraved according to the pattern. This process is called engraving in ancient times, also called carving gold.
(3) After the gold necklace with picture and silver are made into the shape of wire, slice, block, etc., the gold wire, the gold slice, etc. are cut into the required size, inlaid and beaten to prevent from falling off.
(4) Grinding: When the gold wire or gold slice is inlaid, the surface of the copper plate is not flat. It must be ground with the stone, so that the surface of the gold wire or gold slice and the copper plate are naturally smooth, and reach to the point of perfect fit.